Black Roofing Screws

Black finish hides all exposed fastener spots.

Solid seal blocks rain and roof water leaks.

Factory built for long-term roof stability.

Sinsun Factory Direct: Premium Black Roofing Screws for Modern Metal Roofs

Sourcing black roofing screws from a trusted manufacturer? Sinsun offers high-quality black metal roofing screws with TEK points and EPDM washers. Browse size chart, coating options, and get bulk pricing.

Get a Quick Qoute

Popular Classifications of Black Roofing Screws

Black roofing screws sort into several categories based on point type, head style, coating system, and application. Here is how we break them down for customers across Europe, Australia, and the UK.

Self-Drilling Black Roofing Screws (TEK Screws)

These lead the industry’s metal-to-metal segment. The TEK drill point is built in, so you don’t have to pre-drill at all. The tip of the fastener cuts its own hole through the metal panel and into the steel purlin below, and the self-tapping threads grip and lock the fastener in place in one smooth motion. TEK numbers denote the capacity. TEK 2 is for sheet metal up to 1.5 millimetres. TEK 3 is the workhorse for standard 14 – 20 gauge steel purlins up to 3.0 millimetres and TEK 4 punches through heavy structural steel up to 5.0 millimetres. TEK 3 is the most common specification we ship for black metal roofing screws.

Send inquiry Now

Sharp Point Black Roofing Screws (Type 17)

Wood substructures require different geometry. Sharp-point Type 17 screws have a special notch at the tip that evacuates wood fibres as the screw is driven. This prevents split purlins while the screw penetrates cleanly. The coarse thread design bites into timber framing with aggressive pull-out resistance and the same bonded EPDM washer seals the penetration points of the panel. These black screws are ideal for residential roofs, sheds and any other project requiring the attachment of metal panels to wood rafters or plywood decking.

Send inquiry Now

Black Zinc / Black Painted Roofing Screws

Our black zinc-plated and black baked enamel roofing screws provide a clean, deep finish and are suitable for standard exterior applications. In these situations, the fasteners need to blend seamlessly with dark-colored panels. The coating consists of a 5–8 μm electrogalvanized layer and a baked black polyester finish, providing uniform color coverage and moderate corrosion protection. The product is suitable for residential metal roofs, agricultural buildings, and light commercial applications located away from coastal areas and environments with high humidity levels. The screws are equipped with TEK self-drilling tips or sharp No. 17 drill points, allowing them to easily penetrate steel purlins or wooden framing; the bonded EPDM washers effectively seal the drill holes. In mild climates, this product series offers a cost-effective solution that meets the need for visually concealed fastening.

Send inquiry Now

Black Ruspert Roofing Screws

Black Ruspert roofing screws offer the ultimate in corrosion protection and are designed for use in harsh environments where standard coatings would not withstand the elements. Ruspert's three-layer protection system comprises a thick zinc base, an aluminium-rich intermediate coating, and a durable black ceramic topcoat. This structure has been tested to withstand over 1,000 hours of salt spray corrosion (in accordance with ASTM B117), making them the preferred choice for installations within 10 kilometres of the coast, in regions with high humidity, and in industrial zones at risk of chemical exposure. Furthermore, the black coating offers far greater durability against fading, chalking and corrosion than traditional black coatings. TEK drill bits and EPDM washers ensure weatherproofing during installation. For projects with stringent long-term performance requirements, black Ruspert screws provide the durability your roof needs.

Send inquiry Now

Sinsun Black Roofing Screws Specifications

Diameter	Length Range	TEK / Point Type	Head Style	Washer Type	Coating Options	Substrate
#8	13mm – 38mm (0.5″ – 1.5″)	TEK 2 / Sharp	Hex Washer / Pan	Bonded EPDM	Black Zinc, Black Phosphate	Thin sheet metal, wood
#10	25mm – 75mm (1″ – 3″)	TEK 3 / Type 17	Hex Washer	Bonded EPDM	Black Zinc, Ruspert, 304SS	14–20 ga steel, wood purlins
#12	32mm – 100mm (1.25″ – 4″)	TEK 3 / TEK 4	Hex Washer	Bonded EPDM	Ruspert, 304SS, Black Painted	12–20 ga steel structures
#14	45mm – 150mm (1.75″ – 6″)	TEK 4 / TEK 5	Hex Washer	Bonded EPDM	Ruspert, 316SS, Black Painted	10–16 ga heavy steel framing
M4.8 (4.8mm)	25mm – 100mm	TEK 2 / TEK 3 / Type 17	Hex Washer	Bonded EPDM	Black Zinc, Ruspert, Black Phosphate	0.5–3.0mm steel, wood
M5.5 (5.5mm)	35mm – 200mm	TEK 3 / TEK 4	Hex Washer	Bonded EPDM	Ruspert, 304SS, Black Painted	1.5–5.0mm steel structures
M6.3 (6.3mm)	50mm – 200mm	TEK 4 / TEK 5	Hex Washer	Bonded EPDM	Ruspert, 316SS	3.0–12.5mm heavy steel

Standard black metal roofing screws dimensions based on industry practice. Custom lengths available for factory orders.Standard black metal roofing screws dimensions based on industry practice. Custom lengths available for factory orders.

Black Roofing Screws of Technical Parameters

Material

C1022A carbon steel (case-hardened, core hardness 32–40 HRC, case hardness 52–58 HRC) | A2/A4 stainless steel (304/316)

TEK point capacity

TEK 2 up to 1.5mm total steel | TEK 3 up to 3.0mm | TEK 4 up to 5.0mm | TEK 5 up to 6.5–12.5mm

Corrosion coatings

Black zinc (standard exterior), Ruspert triple-layer (1,000+ hours salt spray), Black phosphate (interior)

Sealing washer

Bonded EPDM rubber, temperature range -40°C to +120°C, UV resistant

Driver compatibility

1/4-inch hex drive, magnetic hex shank

Recommended RPM

1,800–2,500 RPM for steel-to-steel installation [1†L7-L8]

Packaging

small boxes (100–500 pcs), contractor pails (1,000–2,500 pcs), as your request

Get a Quick Qoute

Common Uses for Black Metal Roofing Screws

Dark Tone Residential Metal Roofing

Homeowners like the clean, modern look of dark metal panels. But standard silver fasteners kill that illusion instantly. Every visible screw head screams “afterthought”. Black metal roofing screws solve this problem entirely. The color-matched finish blends with dark bronze, charcoal or black panels for a seamless roof appearance. Sharp-point Type 17 screws are well suited to wood cladding construction common in residential projects. Screws are placed 12 to 24 inches apart in field areas and closer 6 to 12 inch spacing is used along panel overlaps and ridges.

Get a Quick Qoute

Agricultural and Equestrian Buildings

Dark roofing profiles are used in barns, stables, equipment sheds, and riding arenas for practical reasons – they disguise dust and weathering. But visible structures with exposed fasteners still need to look professional. Sinsun’s black roofing screws are made to handle agricultural humidity, dust and temperature swings. Class 4 or Ruspert coatings protect against corrosion from livestock waste gases, and the hex washer heads give the torque needed for high-speed installations with pneumatic drivers. Corrugated panels are attached to steel purlins with metal-to-metal Tek screws on large-span agricultural roofs that have withstood decades of weather.

Get a Quick Qoute

Commercial and Industrial Roofing

More and more office complexes, retail centers and industrial warehouses specify dark panel finishes for brand identity or architectural requirements. You can see black metal roofing screws on every overlap of the panel, flashing, and ridge cap. With the TEK 3 and TEK 4 self-drilling points, you can drill right through 14-gauge steel purlins without pre-drilling, saving hours of labor on large projects. Commercial building codes often require documented corrosion testing. Ruspert's 1,000-hour salt spray certification easily meets those specifications [3†L41-L42].

Get a Quick Qoute

Carports, Patio Covers, and Outdoor Living Structures

Black panels get hot in the sun, so every fastener undergoes thermal expansion and contraction. Over time the screw that holds the panel in place will wear down the material. Our black metal roofing screws with bonded EPDM washers allow proper compression while EPDM stays flexible across temperature extremes [7†L7-L8]. The dark finish also better resists UV fading than lighter finishes, so your installation will look new for years to come.

Get a Quick Qoute

Solar Panel Mounting Systems

Ground-mounted and roof-mounted solar arrays attach the racking system to metal roofs with black metal roofing screws. Solar panels are also heavier and have higher wind loading and therefore require TEK 4 or TEK 5 points for penetration through the roof panel and structural steel framing [1†L29-L31]. Solar arrays are designed to last up to 25 years, so corrosion protection is critical. Ruspert or 316 stainless steel coating becomes the standard specification, rather than an upgrade.

Get a Quick Qoute

SINSUN

Stainless-Steel-Roofing-Nails-background

Professional installation instructions

Proper installation maximizes black roofing screws' service life and enhances their waterproofing performance. Based on our factory’s on-site construction experience, we have compiled the following practical steps for installers:

1. Before installation, thoroughly clean the surfaces of the roof panels and framework to remove dust, metal shavings, and debris. This will ensure a tight seal between the washer and the roof panel.

2. Select the appropriate screw size based on the roof panel thickness, and allow for an effective embedment depth of 8–10 mm. This will ensure the screw is securely fastened.

3. Make sure the drill is perpendicular to the roof panel when installing it, and use a low-speed electric drill with a standard hex socket.

4.At the same time, control the driving force appropriately and stop tightening immediately once the washer is in close contact with the roof panel. This will prevent damage to the coating and roof panel deformation.

5. At the edges of the roof panel, the screw spacing should be 30 to 40 centimeters. Installation points should be staggered to enhance overall wind resistance and sealing performance.

Get a Quick Qoute

Real Customer Feedback

This project involved the installation of metal roofing in dark bronze on 14 townhouses covering 2,800 sqm. The developer was adamant that no silver fasteners were seen anywhere. I purchased Sinsun Black TEK 3 self-drilling screws, #12 x 75 millimetres, Ruspert coated. The crew worked through about 8,000 screws. Zero point burnout, even when driving at speed through 1.5mm steel purlins. The panels matched the colours perfectly. No leaks, no rust bleed after two German freeze-thaw winters. "The developer has already approved us for phase two, same specs. "

Markus Richter (Roofing Contractor, Berlin, Germany)

In three years, 80 dairy cows destroy cheap fasteners due to moisture and ammonia in a 180x60 ft dairy barn. In order to clad the roof and walls, I used Sinsun black Class 4 galvanized M5.5x75 millimeter hex head screws. The TEK 3 points were drilled through 0.7mm corrugated panels and into 1.6mm steel purlins without pre-drilling. Twenty-two months later, there is no red rust on any thread line, no discoloration in the black coating. EPDM washers seal tight even in the humidity. This job lost me as a regular customer.

Liam Connolly (Agricultural Contractor, Galway, Ireland)

Contractors along the coast of the Netherlands need fasteners that withstand salt and air. They would replace rusted screw heads in two years. I tested the Sinsun black metal roofing screws with a Ruspert coating in my own salt spray testing chamber against three other brands. After 1,000 hours, there was no red rust on the Sinsun screws. The coating was exactly as specified. I ordered 200,000 pieces of stockings in four sizes. My contractor customers love it. Consistent drill points, reliable washer seating, colour matching that stays black.

Hendrik Visser (Distributor of Building Materials, Rotterdam, The Netherlands)

Project: Exterior cladding replacement on a commercial building "The original installation used standard zinc plated screws which rusted within a year in the humidity and occasional salt laden dust. Replacement panels were specified with Sinsun black 304 stainless steel self-drilling roofing screws. The TEK points easily penetrated through 1.0 millimeter aluminum cladding and into the steel backing. There was no degradation of the coating and no galvanic corrosion at the steel-aluminum interface after 12 months of desert heat and occasional sandstorms. We have added these to our standard specification for all visible exterior fastenings.

Ahmed Al-Mansoori (Facilities Manager, Abu Dhabi, U.A.E.)

Frequently Asked Questions (FAQ)

Q: What are black roofing screws called in the construction industry?

A: You will hear them called black metal roofing screws, roofing screws black, dark roofing fasteners, colored head roofing screws, or simply black TEK screws. The generic category is self-drilling roofing screws with colored heads.

Q: What is the difference between TEK 3 and TEK 5 black metal roofing screws?

A: A TEK 3 point drills steel up to 3.0 millimeters thick—suitable for standard 14–20 gauge purlins in residential and agricultural roofing. A TEK 5 point punches through steel up to 12.5 millimeters, required for heavy structural steel, industrial buildings, and solar array mounting systems [1†L29-L31].

Q: Can I use impact drivers to install black roofing screws?

A: No. Industry practice recommends against impact drivers for self-drilling screws. The hammering action overheats the TEK point, burns out drill tips, strips threads, and chips black coatings. Use a standard screw gun with clutch set to moderate tension, running at 1,800–2,500 RPM.

Q: How do I prevent black roofing screws from rusting on a coastal roof?

A: Specify screws with Ruspert triple-layer coating (1,000-hour salt spray tested) or 304 stainless steel. For direct saltwater exposure, choose 316 stainless steel. Standard black zinc or black painted screws will not survive coastal conditions beyond a few seasons [3†L41-L42].

Q: What size black roofing screw do I need for standard 0.7mm corrugated panels on 1.6mm steel purlins?

A: Use a #12 or M5.5 diameter screw with TEK 3 point, length 45–75 millimeters depending on the panel profile height. The TEK 3 point handles the total steel thickness (0.7 + 1.6 = 2.3 mm) without burnout.

Q: Do black metal roofing screws come with washers attached?

A: Yes. Sinsun black roofing screws ship with bonded EPDM washers pre-assembled under the hex head. The washer is captive and will not separate during shipping or installation [2†L21-L23].

Q: What is the best black coating for metal roofing screws in a humid environment?

A: Ruspert triple-layer coating delivers verified 1,000-hour salt spray resistance, making it the top choice for high-humidity regions, coastal zones, and industrial environments. The matte black finish also provides excellent UV resistance [3†L41-L42].

Q: Should I screw into the rib or the flat of a metal roof panel?

A: Always install black roofing screws in the flat of the panel (the valley). The level surface allows the EPDM washer to compress evenly and form a watertight seal. Screwing into the raised rib deforms the washer and creates leak paths [7†L28-L32].

Q: How much screw penetration do I need into a wood purlin?

A: At least 25mm (1 inch) of threaded shank must embed in solid wood to achieve rated pull-out values. For steel-to-wood fastening, use sharp-point Type 17 screws, not TEK drill points.

Q10

Q: Do you offer factory direct pricing on black self-drilling roofing screws?

A: Yes. Sinsun manufactures black metal roofing screws direct to contractors, distributors, and industrial buyers worldwide. Contact us with your specifications—diameter, length, TEK point, coating, annual volume—and we will prepare tiered pricing that beats distributor markup.

Q11

Q: What is the difference between black oxide and black painted roofing screws?

A: Black oxide is a thin conversion coating that offers minimal corrosion resistance—suitable only for interior or dry applications. Black painted screws feature a baked polyester topcoat over a zinc base layer, providing proper exterior weather resistance and color consistency.

Q12

Q: Can black metal roofing screws be used with aluminum panels?

A: Yes, but specify stainless steel black screws (304 or 316) to prevent galvanic corrosion between carbon steel and aluminum. Do not use coated carbon steel black screws with aluminum panels in wet or coastal environments—the dissimilar metals will corrode.

Q13

Q: Why do my black roofing screws leak even with the washer?

A: The most common causes are over-driving (squeezing the washer past the head edge), under-driving (loose washer with no compression), angled screws (washer deforms unevenly), or screws placed on ribs instead of flats. Correct technique: perpendicular drive, moderate clutch tension, stop when the washer begins a visible but light compression.

Q14

Q: Do you offer screw finder sample packs before I place a bulk order?

A: Absolutely. We ship sample boxes of black metal roofing screws in your specified size and coating—run them through your tools, test them on your materials, inspect the washer seating and coating durability. Quality verification is the only way to buy fasteners with confidence.

Ready to secure your black roofing fastener supply chain?

If you install dark metal roofs, distribute fasteners to contractors, or manage commercial roofing procurement, talk to us. We manufacture Sinsun black self-drilling roofing screws with consistent TEK points, durable coatings, and reliable EPDM sealing. Direct from our factory to your job site—no middlemen, no markup. Send me your specifications, and I will put together a bulk quote that outperforms anything your current supplier offers.

Get a Quick Qoute

Keep In Touch

Get Your Custom Quote Today

Whether you need small batches for a residential project or bulk orders for a large industrial job, Sinsun has you covered. We understand high-end projects demand high-quality fasteners, so we never cut corners. Contact our team now for a competitive quote—we’ll help you pick the right screws, deliver on time, and ensure your roof stays secure for decades. No rust, no leaks, just reliable performance you can trust.

our experts will solve them in no time.