Self-Drilling Drywall Screws
Drill and Fasten in One Step. Maximum Speed on Metal.
Eliminate Pre-Drilling. Conquer Steel Studs with Ease.
The Professional's Choice for Modern Metal Framing.
01
Sinsun ProFast Self Drilling Drywall Screws for Metal Studs
Buy premium self-drilling drywall screws designed to drill and tap their own hole in steel studs. Save time and labor. Perfect for metal framing, bulk contractor packs available. Shop now.
Get a Quick QouteProDrill SDX Self Drilling Drywall Screws
Our engineered self drilling plasterboard screws will help you put up drywall faster on metal studs and channels.
They are also known as Tek screws or drill-tip screws. They have a built-in drill point that cuts through light-gauge steel, so you do not have to pre-drill pilot holes, which saves time.
These screws are the best choice for modern metal framing in both commercial and residential construction because they are efficient and leave a perfect finish.
Bugle head self drilling screw of Feature & Benefits:
This screw is the ultimate time and labor saver: The integral drill point allows the screw to drill, tap, and fasten in one continuous operation, dramatically increasing installation speed on steel studs.
Eliminates Tool Switching: There is no need to switch between a drill bit and a screwdriver bit. You will be able to streamline your workflow and reduce frustration as a result.
Clean, Secure Fastening: The sharp drill tip starts cleanly, minimizing metal burrs. The fine threads provide excellent grip and high pull-out resistance in metal.
Perfect for Modern Framing: This product is specifically designed for fastening drywall to 25-gauge and 20-gauge steel studs, track, and furring channels.
Consistent, Professional Finish: The bugle head is designed to countersink to the perfect depth without tearing the drywall paper, ready for taping.
Construction: Made of hardened steel with a corrosion-resistant coating, such as zinc or ceramic, for long-lasting performance.
Choose Gauge and Length: For regular 1/2" drywall on steel studs, use #6 x 1-5/8". Use #8 x 2-1/2" or 3" for boards that are double-layered or thicker to ensure they are deep enough into the framing member (at least 5/8" into steel).
Drill point vs. material thickness: Ensure that the drill point number (#2, #3) matches the thickness of the metal you are drilling through. Using a point that is too small can cause it to break.
Self-drilling screws are better than self-tapping screws because they do not need a pre-drilled hole. Instead, they combine the drill and the fastener into one operation, which saves a lot of time.
Compliance: Screws are made to meet or exceed the mechanical properties and dimensions set by the industry.
Self drilling anchor screws Applications:
Self drilling drywall screws for metal studs，Fastening drywall / plasterboard directly to light gauge steel studs.
Securing drywall to metal ceiling grids and furring channels.
Attaching metal lath or other sheet materials to steel framing.
General sheet metal to sheet metal fastening in HVAC or fabrication.
01
-
Proven Performance
Precision-ground drill points ensure consistent starting and don't "walk" on metal surfaces.
-
Best Design
The right mix of point length, thread pitch, and head design ensures that every time you drive, you get a quick, secure, and flush set.
-
Tool compatibility
It is compatible with regular cordless drills, impact drivers, and drywall screw guns.
-
Cost-Effective
For metal framing projects, it significantly cuts down on labor costs. For people who use a lot of something, bulk pricing is the best deal.
Q: What is the difference between screws that tap themselves and screws that drill themselves?
+
A: Self-tapping screws can make threads in a hole that already exists or in thin metal. Self-drilling screws have a point that can drill a hole in metal from scratch. Self-drilling is necessary for steel studs that do not have pilot holes.
Q: Can I use these on wood beams?
+
A: It is not a good idea. The drill point is not needed for wood and cato n cause it split. Use regular coarse-threaded drywall screws for wood studs.
Q: Is it okay to use 1 1/4" self-drilling screws on wood studs?
+
A: Not a good idea. Coarse-thread wood screws are better for wood because they grip better and cost less. Use self-drilling screws only for framing metal.
Q: What are collated self-drilling screws used for?
+
A: These are drywall screws that come in strips or coils and are already joined together. They are used with an automatic feed screw gun to quickly install drywall on metal studs. The collation allows yto ou drive screws quickly and continuously without having to handle each one, which makes them necessary for large commercial or residential metal framing projects.
Q: What thickness of steel can these screws go through?
+
A: Our regular #6 screws with a #2 drill point can handle steel up to 20-gauge. A heavier #3 or #4 point screw is needed for thicker metal, such as 14 to 16 gauge.
Q: Can you get them in strips that are already collated for automatic feed guns?
+
A: Yes. We have collated strip sizes that work with most automatic drywall screw guns and are popular for large jobs.
Q: What is a “self-drilling anchor” for drywall, and how does it work?
+
A: Unlike a screw, a self-drilling drywall anchor is a one-piece plastic or metal fastener. You drive it directly into the drywall with a screwdriver or drill. It drills its own pilot hole, then expands or threads internally to create a strong, permanent hold. A standard screw is then inserted into the now-anchored receptacle to hold your item. It’s for medium-duty hanging (e.g., shelves, mirrors) in hollow walls.
Q: Can I use them with my regular drill?
+
A: No. They require a specialized collated screw gun or a compatible collated attachment that can automatically feed, drive, and detach the screw from the strip. They are tools designed for productivity and volume.
Keep In Touch
TO KNOW MORE ABOUT Sinsun, PLEASE CONTACT US！
We are committed to providing you with the best quality service and look forward to communicating with you to solve problems together and bring you a better experience.
our experts will solve them in no time.
Intelligence-centric Innovation
Our elite R&D team upgrades the installation method, optical structure and chip drive, relying on data from our R&D lab to present a more streamlined, and tailored iteration of the lighting products.
Science-based Production Concept
With continuous experimentation and verification in our own lighting laboratory, our production has broken through the traditional boundaries to further modernize our products with intelligent welding processes.
Non-concessional Inspection
At MIBANG, the lightings are allowed to be shipped only if they pass the test at 100%. Military-grade inspection standards improve the safety of our products, and multiple types of detectors enable more meticulous testing.